Power Button
Press and hold the power button for three seconds to power your unit on or off. While the unit is on, the R “Compressor Running” light may illuminate to indicate the internal compressor is active. After powering off, all button lights will stay off. Once any button is touched, the power button will illuminate for five seconds.
Quick Chill
Press this button to activate the Quick Chill setting. The LED indicator will flash 5 times before
setting the temperature to 33ºF. After 24 hours or if the Quick Chill button is pressed again, the
unit will return to the temperature setting prior to entering Quick Chill.
NOTE: For dual zone models, pressing Quick Chill once will activate the upper zone, and the upper zone display will flash 5 times before setting the temperature to 33ºF. Pressing the Quick Chill button again while the display is flashing will enable Quick Chill in the lower zone.
Watch our product video below on the Presrv™ Refrigerator Drawers Quick Chill temperature mode to see how you can get your unit to an ultra-low temperature at the touch of a button.
Interior Light
Press this button to cycle through the different internal light settings. The lights, display window, and button colors will be affected. There are three light settings: Cloud White, Deep Blue and Amber. To turn the lights off and on, press the hold the Interior Light button for three seconds.
Decrease Temperature
Press this button to decrease the temperature by one (1) degree increments. 33ºF is the lowest
available temperature on this unit.
Increase Temperature
Press this button to increase the temperature by one (1) degree increments. 65ºF is the highest
available temperature on this unit.
ºF/ºC Selector
Hold the Increase and Decrease Temperature buttons at the same time for three seconds to switch the display temperature.
Related to